Dualit Kitchen Blender User Manual

050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 1  
K I T C H E N B L E N D E R  
INSTRUCTION MANUAL  
GB/01/07  
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 3  
CONTENTS  
SAFETY PRECAUTIONS.............................  
4
5
SAFETY SYSTEM.......................................  
BEFORE PLUGGING IN.............................  
ELECTRICAL REQUIREMENTS...................  
PARTS AND CONTROLS..........................  
REMOVABLE BLADE SYSTEM...................  
TO ASSEMBLE YOUR BLENDER................  
SAFETY INTERLOCK SYSTEM....................  
USING YOUR BLENDER............................  
5
5
5 & 6  
7
8
8
8
9
9
CORD STORAGE......................................  
PULSE FEATURE........................................  
TURBO PULSE..........................................  
FILLER CAP/ BLADE KEY............................  
CLEANING...............................................  
REPLACEMENT CORD / SAFETY SYSTEM..  
BLENDER TIPS..........................................  
UK AFTER SALES SERVICE.........................  
9
9
9
9
10  
10  
3
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 4  
SAFETY PRECAUTIONS  
• The use of attachments, not recommended or sold by the  
manufacturer may cause fire, electric shock or injury.  
• When processing warm liquids, use heat proof gloves a.  
• This is an attended appliance.  
IMPORTANT SAFEGUARDS  
When using electrical appliances, basic safety precautions  
should always be followed including the following:  
• Be certain the jar is firmly on the base and the lid and blade  
assembly is locked in place before operating appliance.  
• Never feed food by hand. Always use food pusher.  
• Do not attempt to defeat the interlock mechanisms.  
• Servicing should be performed by a Dualit service representative.  
• Never turn the blender “ON” for longer than one minute - it  
may overheat. All foods are fully processed within one minute,  
especially dry food and small portions.  
• Never remove the jug from the power base until motor and  
blades are stationary. Damage to the clutch can occur.  
• Never blend more than1.4 litres.  
• Do not leave the blades in water and never leave the blender  
jug with any liquid inside it.  
READ ALL INSTRUCTIONS  
• To protect against risk of electrical shock, do not put blender  
powerbase in water or other liquid.  
• Close supervision is necessary when any appliance is used by or near  
children.  
• Unplug from outlet when not in use, before putting on or  
taking off parts, and before cleaning.  
• Avoid contact with moving parts.  
• Do not operate the blender with a damaged cord or plug or  
after appliance malfunctions, or is dropped or damaged in  
any manner. Return appliance to the nearest Authorized Service  
Centre for examination, repair or electrical or mechanical  
adjustment.  
• Keep the jug empty when not in use.  
• Do not use outdoors.  
WARNING: Do not add boiling liquids or foods to  
glass jug. Always allow liquid or food items to cool  
below 60°c before adding to the jug.  
• Frozen foods with the exception of small pieces of  
fruit or ice cubes should not be placed in the jug.  
• Do not insert frozen items into jug taken directly  
from a hot dishwasher.  
• Do not let cord hang over edge of table or counter.  
• Keep hands and utensils out of container while blending to  
reduce the risk of severe injury to persons or damage to the  
blender. A scraper may be used but must be used only when  
the blender is not running.  
Blades are sharp. Handle carefully.  
• To reduce the risk of injury never place the cutter assembly  
blades on base without jug properly attached.  
• Always operate blender with Dualit lid in place.  
• Do not immerse or wash jug in boiling or very hot water.  
SAVE THESE INSTRUCTIONS  
4
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 5  
BLENDER PARTS  
SAFETY SYSTEM  
This appliance is provided with a safety system which disables  
the mechanism if the jug lid or blade assembly is not fitted  
even if the switch button is “ON”.  
1
Filler cap / Blade removal key  
Safety Interlock System  
Lid  
2
3
Note: Do not use the jug to switch the appliance on and off.  
• Use this product with rated voltage A.C. outlet only.  
• Be sure to unplug the A.C. cord when blender is not being  
used.  
4
Glass jug with blades  
Power base  
5
BEFORE PLUGGING IN  
6
Variable speed control knob  
Start/Stop button  
Pulse button  
• Do not plug the appliance in before checking that the  
voltage indicated on the rating plate is the same as the  
electrical supply voltage.  
7
8
• UK only. The wires in the flex are coloured as follows:  
9
Power light  
Blue = Neutral  
Brown = Live Green / Yellow = Earth  
10  
11  
12  
13  
On/Off switch  
Blade assembley  
Gasket  
ELECTRICAL REQUIREMENTS  
Collar  
UK 230V, 50Hz a.c. 13 amp  
5
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 6  
Fig. 1 Blender Assembly  
Fig. 2 Safety Interlock System  
1
3
2
4
Closed - Motor will operate  
Fig. 3 Cord Storage  
Open - Motor will not run  
Fig. 4 Control Switches  
2
5
6
8
7
10  
9
6
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 7  
Fig. 5 Locating the blade key  
Fig. 6 Unlocking blade assembly  
Fig. 7 Removing blade from jug  
1
11  
12  
13  
Unlocking the blade assembly for cleaning:  
• The filler cap doubles as a key 1 to unlock the blade from jug.  
• To unlock the blade, remove the filler cap / key from the lid.  
Turn the jug 4 upside down and rest on a steady surface.  
1
3
• Position the key  
in the collar  
aligning the indicators on  
• To replace and lock the blade assembly, reverse the unlocking  
instructions.  
the collar 13 as shown in Fig 5.  
• Holding the jug steady, rotate the key clockwise Fig 6. to the  
11  
IMPORTANT: ENSURE THE BLADE ASSEMBLY  
AND RUBBER GASKET IS CORRECTLY  
13  
unlock position indicated on the collar  
vertically to remove the blade assembly.  
Fig 7. Then pull  
12  
LOCKED INTO THE JAR TO CREATE A WATER  
TIGHT SEAL BEFORE USING.  
CAUTION: THE BLADES ARE VERY SHARP!  
7
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 8  
TO ASSEMBLE YOUR BLENDER  
USING YOUR BLENDER  
• Do not plug in until you have assembled your blender and  
unplug straight after use. Fig. 1  
• Plug power cord into earthed socket. Blender is now ready  
for use. Please Note: The Red “standby” light indicates that  
there is power to the Blender. This light changes to a Green  
4
• Prior to first use, wash lid 3 , jug and blade unit  
• Place the jug onto the power base 5 .  
.
9
light when the blades are running  
.
• Place fully assembled jug onto power base.  
• Insert foodstuffs into the jug.  
4
3
• Push the lid  
onto the jug 4 and at the rear of the lid  
2
locate the plunger into the Safety Interlock System . Fig. 2  
• Attach lid, ensuring the safety plunger is in place. Fig. 2  
Keep hand on rear of lid to ensure safety switch is engaged.  
• The Dualit blender has a double Safety Interlock System that  
prevents the motor running unless the lid and blade is correctly  
__in position.  
9
• Switch unit on using 10 , the red power light  
will flash.  
6
• Turn speed control knob  
to desired setting. Fig. 4  
9
7
• Press the start/stop button  
, the red flashing light  
,
SAFETY INTERLOCK SYSTEM  
will turn to a green light and the blades will rotate.  
Your blender comes with a unique double Safety Interlock  
7
• To turn off, press the start/stop button  
again.  
4
3
System. Only use with the glass jar and lid firmly in place,  
• To pour, using the handle, lift the jug vertically upwards off  
the blender base, remove the lid to pour.  
2
ensure the lid and plunger  
are correctly positioned into the  
Safety Interlock System. Fig. 2  
• The speed can be adjusted when blending by turning the  
6
speed knob  
in either direction.  
11  
A small micro switch detects if the blade assembly  
is locked  
8
• All speeds can be used with pulse button . On the speed  
13  
4
into the collor  
and blade unit  
start.  
and is located in the correct position. If the jug  
are not correctly assembled the motor will not  
control knob 1 is slow 5 is fast.  
• When blending warmed foods, do not add ‘hot’ liquids to  
glass jug. Always allow liquid to cool below 60°c before adding  
to the jug. Place gloved hand over the lid and only operate  
on slow speed.  
ALWAYS PLACE ONE HAND ON TOP OF THE LID WHEN THE  
MOTOR IS RUNNING. ENSURE SAFETY INTERLOCK IS FIRMLY  
ENGAGED.  
• Do not insert frozen foods into jug taken directly from a hot  
dishwasher.  
8
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 9  
CORD STORAGE  
CLEANING  
• To vary the length of the power cord/cable uncoil from  
storage area beneath powerbase. Fig. 3  
• Switch off, unplug and un-assemble before cleaning.  
• Do not let the power base, flex or plug get wet.  
• Wipe power base with damp cloth, then dry.  
PULSE FEATURE  
• All other parts can be washed in dishwasher, using a low  
temperature cycle, then dry.  
• Ensure the blender is fully assembled and in place on motor  
base. Place ingredients into the jug and firmly attach the lid.  
• To clean the jug, quarter fill with warm water, add a few  
drops of washing liquid and whizz for 30 seconds. Rinse.  
• Switch blender “on”10 ,the red “standby”  
light will flash.  
9
• To remove blade for cleaning, follow procedure on page 5.  
• Do not touch the blades - brush clean under a tap/faucet.  
Then leave to dry out of children’s reach.  
9
8
• Press pulse button  
, green light  
will glow and blades  
is released.  
8
will rotate at full speed until button  
• Only use rubber spatula to mix foods when blender lid is  
removed, the speed knob is at speed 1 and the blades are  
stationary.  
Warning: Do not immerse or wash jug in boiling or  
very hot water above 60°c.  
.
TURBO PULSE  
REPLACEMENT CORD / SAFETY SYSTEM  
If the power cord is damaged it must, for safety reasons,  
be replaced by Dualit or an authorised Dualit repairer.  
8
• When blending at any speed the pulse button  
can be  
pressed for full speed and will hold full speed until pulse  
button is released and speed will resume speed on knob  
6
.
If blender fails to operate refit lid ensuring correct positioning  
of the plunger into the Safety Interlock System and/or unplug  
for 15 minutes, plug in and try again.  
FILLER CAP/ BLADE KEY  
Ensure the blade assembly is correctly fitted.  
1
• Remove cap  
and add ingredients only at slow speeds.  
If problems persist, either contact the shop where you  
purchased from, or telephone Dualit.  
• When using at high speed, with a full jug or with warm  
contents, stop blender and then add ingredients.  
In UK call Dualit Care Line 01293 652 500 or  
• The filler cap doubles up as a key for removing the blade  
assembly from the Jug for cleaning.  
9
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 10  
UK AFTER SALES SERVICE  
BLENDER TIPS  
• Make sure the electrical outlet is rated at the same voltage  
as that stated on the bottom of the power base.  
If your blender fails within one year from date of purchase we will  
repair or replace it free of charge provided:  
• Always use the blender on a clean, dry surface.  
You have not misused, neglected or damaged it.  
It has not been modified.  
• Cut most foods into cubes approximately 3/4” (1.8cm) to  
1” (2.5cm) to achieve a more uniform result.  
You supply your receipt showing when you bought your  
blender.  
• Use a rubber or plastic spatula as needed, only when the  
motor is off. Never use metal utensils, as damage may occur  
to the jug and blades.  
The guarantee does not affect your statutory rights.  
• Place lid on firmly. The blender will only operate with the lid  
correctly positioned on the jug and the plunger inserted in  
the safety switch.  
If over one year, contact Dualit for recommended repair agents.  
Further advice on using your Dualit blender and other products in  
the Dualit Range is available from:  
• Always place one hand on top of the lid when the motor  
is running.  
Dualit Customer CareLine on  
+44(0) 1293 652 500  
(09:00 to 17:00 Monday to Friday)  
• Cool hot foods to below 60°c before blending and with all  
foods, start at slow speed to combine ingredients then  
increase speed, if necessary. Use heat proof gloves, if  
blending warm foods.  
Alternatively email your enquiry to [email protected].  
• For a thicker slushy consistency in frozen drinks, simply add  
more ice, a cube at a time, until desired consistency is  
reached.  
Dualit does not assume any responsibility for incidental or  
consequential damages.  
Specifications subject to change without notice.  
10  
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 11  
050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 12  
CE Compliant to  
89/336/EEC (EMC directive) and73/23  
& 93/68/ EEC (LV directive)  
DUALIT LIMITED COUNTY OAK WAY CRAWLEY WEST SUSSEX RH11 7ST  
TELEPHONE: +44 (0) 1293 652 500 FACSIMILE: +44 (0) 1293 652 555  
EMAIL: info dualit.com WEB: www.dualit.com  
@

Alpine Electronics Car Stereo System CDE 9880R User Manual
Canon Camera Accessories Ver 3 6 User Manual
Canon PowerShot A95 User Manual
Hypertec Making IT Perform TAN1102HY User Manual
Ikelite GZ MG 330 User Manual
Jabra Bluetooth Headset 2 User Manual
JBL GT1000d User Manual
JVC 0509DTSMDTJEIN User Manual
JVC Camcorder GZ HM30U User Manual
JVC GET0735 001A User Manual